Toyota Corolla

1992-1998 of release

Repair and operation of the car


Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
- 12. Electric equipment
   12.1. Safety locks
   12.2. The burned-through crossing points
   12.3. Automatic switches
   12.4. Relay
   12.5. Breakers of indexes of turns / alarm system
   12.6. The combined switch
   12.7. The switches installed on a steering column
   12.8. Lock of ignition and drum of the lock
   12.9. Switch of a heater of back glass
   12.10. Heater of back glass
   12.11. Radio receiver and loudspeakers
   12.12. Antenna
   12.13. Bulbs of headlights of head light
   12.14. Headlights of head light
   12.15. Replacement of bulbs
   12.16. System of day inclusion of headlights
   12.17. Engine of screen wipers
   12.18. Instrument guard
   12.19. Sound signal
   12.20. System cruise control
   12.21. System of the central lock
   12.22. System of window regulators
   12.23. Rear-view mirrors with the electric drive
   12.24. Safety airbag
   + 12.25. Electroschemes


12.11. Radio receiver and loudspeakers
GENERAL INFORMATION
Prevention

On these models the airbag of safety which can reveal (it will be filled with air) when it is connected to the accumulator is installed. Disconnect a wire of the negative plug of the accumulator and wait at least two minutes before work with the safety airbag.

If the stereoplayer of your car has system of the coding, check, whether you know a code of activation of the player before an accumulator detachment.

RADIO RECEIVER

Removal and installation
PERFORMANCE ORDER
1. Disconnect a wire of the negative plug of the accumulator.
2. Remove the central panel of finishing (see subsection 11.21).
3. Turn off fixing screws or bolts and get the radio receiver from the dashboard.
4. Turn off screws or nuts, remove the radio receiver from an arm, then disconnect the socket of connection and a wire of the antenna.
5. Installation is carried out upside-down removals.

LOUDSPEAKERS

Removal and installation
PERFORMANCE ORDER
1. Remove the panel of finishing of a forward door (see subsection 11.12).
2. Turn off fixing nuts / screws of the loudspeaker. Disconnect the socket of connection and remove the loudspeaker (screws of fastening of the loudspeaker, ustanovlennoko on a forward door – are specified by shooters).
3. Installation is carried out upside-down removals.