Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
- 5. Fuel, exhaust systems
   5.1. Specifications
   5.2. Order of performance of a decompression of fuel system
   5.3. Fuel pump and pressure of fuel
   5.4. Removal and installation of the fuel pump
   5.5. Fuel level sensor
   5.6. Fuel pipes and joints
   5.7. Fuel tank
   5.8. Cleaning and repair of a fuel tank
   5.9. Air filter
   5.10. Cable of the drive of a butterfly valve
   5.11. System of electronic injection of fuel (EFI - system)
   5.12. Check and replacement of EFI units - systems
   5.13. Service of an exhaust system
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


5.4. Removal and installation of the fuel pump

PERFORMANCE ORDER
1. Remove a fuel tank.
2. Disconnect the battery from weight.
3. Working from salon, remove back a seat (see subsection 11.18).
4. Uncover the hatch of the fuel pump and the fuel level sensor (are specified by shooters).
5. Disconnect the socket. Disconnect fuel pipe tubes.
6. Turn off bolts of fastening of the fuel pump and fuel level sensor (are specified by shooters).
7. Carefully get from a fuel tank the fuel pump assembled with the sensor.
8. Having carefully hooked the lower part of the pump get the pump from an arm.
9. Installation is carried out upside-down.