Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
- 7. Transmissions
   + 7.1. Mechanical transmission
   - 7.2. Automatic transmission
      7.2.1. Specifications
      7.2.2. Diagnostics
      7.2.3. Replacement of epiploons
      7.2.4. Rope of a butterfly valve
      7.2.5. The switching rope
      7.2.6. The switch blocking inclusion of a starter by the included transfer
      7.2.7. Fastening of a transmission
      7.2.8. Removal and installation of a transmission
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


7.2.7. Fastening of a transmission

Check and replacement

PERFORMANCE ORDER
1. Insert a big screw-driver or lomik between fastening and a body as it is shown on an illustration, and try to move fastening.
2. Fastening has to give in a little, but to be rather rigid; if fastening goes too strongly, replace it.
3. For fastening replacement, establish a jack under a transmission, turn off nuts and bolts and remove fastening. Perhaps, you should raise a little a transmission to remove fastening.
4. Installation is carried out upside-down removals.