Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
11.1. Maintenance and repair
11.2. Vinyl finishing
11.3. Upholstery and rugs
11.4. Repair of insignificant damages of a body
11.5. Repair of considerable damages of a body
11.6. Loops and locks
11.7. Windshield and motionless glasses
11.8. Cowl
11.9. Trunk lid
11.10. A back door (models with a body "Station wagon")
11.11. Basic rack of a back door
11.12. Decorative panel of a door
11.13. Door
11.14. Door latch, cylinder of the lock and handle
11.15. Door windowpane
11.16. Bumpers
11.17. External mirror
11.18. Seats
11.19. Frame of a combination of devices
11.20. Glove compartment
11.21. Central decorative panel
11.22. Casing of a steering column
11.23. Lower panel of finishing of a steering column
11.24. Console
11.25. Dashboard
11.26. Front grille
11.27. Ventilating grate of a cowl
11.28. Seat belts
+ 12. Electric equipment
|
Removal
| PERFORMANCE ORDER |
| 1. Remove the decorative panel of a door (see subsection 11.12). Disconnect any electric connections and push them through an opening at doors that they did not prevent removal. |
|
2. Place a jack or trestle under a door or ask the assistant to support a door when you unscrew bolts. |
Prevention
If the jack or goats are used, place rags between them and a door to protect the painted door surface.
|
|
3. Unscrew a strut bolt (it is specified by an arrow) the limiter of opening of a door. |
|
4. Before easing or unscrewing of bolts (are specified by shooters) put marks round them, having marked their location. |
| 5. Unscrew bolts of fastening of a loop to a door and carefully remove a door. Installation is made in the return sequence. |
|
Adjustment
In an installation time be convinced that the door is located correctly. If it is necessary, adjust it as it is described below:
| PERFORMANCE ORDER |
|
1. Vertical and longitudinal adjustment is carried out by weakening of bolts of fastening of loops to a body and movement of a door as it is necessary. The special curved adaptation can be necessary for you to reach some bolts. |
|
2. Vertical adjustment and adjustment of depth of landing of a door are carried out by weakening of bolts of fastening of lateral loops of a door and movement of a door as it is necessary. The special curved adaptation can be necessary for you to reach some bolts. |
|
3. The latch of the door lock can also be adjusted on a vertical and across to provide reliable gearing with the locking mechanism. It can be made, having weakened fixing bolts (are specified by shooters) and moving a latch as it is necessary. |
|
|
|