Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11.10. A back door (models with a body "Station wagon")
   11.11. Basic rack of a back door
   11.12. Decorative panel of a door
   11.13. Door
   11.14. Door latch, cylinder of the lock and handle
   11.15. Door windowpane
   11.16. Bumpers
   11.17. External mirror
   11.18. Seats
   11.19. Frame of a combination of devices
   11.20. Glove compartment
   11.21. Central decorative panel
   11.22. Casing of a steering column
   11.23. Lower panel of finishing of a steering column
   11.24. Console
   11.25. Dashboard
   11.26. Front grille
   11.27. Ventilating grate of a cowl
   11.28. Seat belts
+ 12. Electric equipment



11.28. Seat belts

GENERAL INFORMATION

Prevention

Later models are equipped by pyrotechnic natyazhitel of seat belts. Do not try to remove knot of a natyazhitel of a seat belt if it is established as if definitely not to observe the correct procedure of removal, it is possible to be traumatized. For carrying out any works which concern removal and installation of seat belts to specialists of car repair shop.


Typical details of seat belts on cars with a body like "Sedan"

1. Seat back
2. Seat pillow
3. Humeral anchor
4. Internal seat belt
5. Top part of finishing of the central rack
6. Bolt of fastening of a seat belt
7. Adjustable anchor
8. External anchor of a seat belt
9. Finishing of a forward rack
10. Lower part of finishing of a forward rack
11. Internal part of lateral finishing of a roof
12. Overlay for a step of a back rack
13. Lower part of finishing of the central rack
14. Overlay for a step of a forward rack
15. Seat back sidewall

Typical details of seat belts on cars with a body like "Station wagon"

1. Cover of a back rack
2. Latch of the lock of a back seat
3. Cover of a latch of the lock of a back seat
4. Lateral panel of finishing
5. Quadrangular decorative floor cover of a clip
6. Hinge of a back seat
7. Humeral anchor
8. Seat back assembled


9. External anchor of a belt
10. Central belt
11. Flooring plate
12. Back part of finishing of a floor
With a body back cover:
13. Suspended arm of a cover of the lock
14. Cover of a back rack
15. Back cover

Check

PERFORMANCE ORDER
1. Check seat belts, latches, uvulas of latches and the directing loops for existence of any signs of damages or wear.
2. Be convinced that the reminding bulb of a seat belt is lit when the key is turned.
3. Seat belts are designed so that to be blocked at a sudden stop or blow, and at the same time to provide free movement under normal conditions of the movement. Natyazhiteli have to hold a belt on your breast during the movement and take up a belt when the latch is uncoupled.
4. If when carrying out check malfunctions of system of seat belts were found, to replace all details which it is necessary, having addressed to specialists of car repair shop.