Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
- 11. Body
   11.1. Maintenance and repair
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Repair of insignificant damages of a body
   11.5. Repair of considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Cowl
   11.9. Trunk lid
   11.10. A back door (models with a body "Station wagon")
   11.11. Basic rack of a back door
   11.12. Decorative panel of a door
   11.13. Door
   11.14. Door latch, cylinder of the lock and handle
   11.15. Door windowpane
   11.16. Bumpers
   11.17. External mirror
   11.18. Seats
   11.19. Frame of a combination of devices
   11.20. Glove compartment
   11.21. Central decorative panel
   11.22. Casing of a steering column
   11.23. Lower panel of finishing of a steering column
   11.24. Console
   11.25. Dashboard
   11.26. Front grille
   11.27. Ventilating grate of a cowl
   11.28. Seat belts
+ 12. Electric equipment



11.9. Trunk lid

Removal

PERFORMANCE ORDER
1. Open a trunk lid and close edges of a luggage carrier rags to protect the painted surfaces from damages during removal of a cover.
2. Remove a decorative covering of a trunk lid.
3. Put marks round adjusting bolts of a trunk lid.
4. By means of the assistant supporting a cover, unscrew bolts of fastening of a cover to loops and remove a trunk lid.

Installation and adjustment

PERFORMANCE ORDER
1. Installation is carried out in the return sequence.
Prevention

In an installation time of a trunk lid combine bolts of fastening of a cover to loops with the marks made during removal.


2. After installation close a cover and be convinced that it is located correctly rather surrounding panels.
3. Longitudinal and cross adjustment is carried out by weakening of bolts of fastening of a trunk lid to loops and small shift of a cover.
4. To adjust a cover so that it in a closed position settled down level with a body, weaken adjusting bolts and move the lock and a latch.