Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engines
   + 3.1. Petrol engines
   + 3.2. Diesel engine
   - 3.3. Electric equipment of the engine
      3.3.1. Specifications
      3.3.2. Battery
      3.3.3. Power cables
      3.3.4. System of ignition
      3.3.5. Ignition coil
      3.3.6. Ignition distributor
      3.3.7. Check and installation of the moment of ignition
      3.3.8. Block of electronic ignition
      3.3.9. Induction sensor
      3.3.10. System of a charge of the battery
      3.3.11. Generator
      3.3.12. Generator details
      3.3.13. System of start-up of the engine
      3.3.14. Starter electric motor
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


3.3.2. Battery

Removal

PERFORMANCE ORDER
1. Disconnect at first the plug of a negative pole, then the plug of a positive pole, having turned off nuts and bolts (are specified by shooters).
2. Disconnect both cables from the battery, having begun with a cable of a negative pole.
3. Disconnect a fastening collar.
4. Lift the battery. Consider that the battery heavy.
5. Having got the battery examine a tray, believe corrosion existence.
6. When replacing the battery be convinced that parameters of the new battery (dimensions, capacity and current of return) just the same, as at the replaced.

Installation

The battery is installed upside-down.