Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
- 2. Maintenance
   2.1. Specifications
   2.2. Arrangement of knots and details
   2.3. Check of level of liquids
   2.4. Check of a condition of tires and pressure in tires
   + 2.5. Servicing through each 5000 km or 3 months
   - 2.6. Servicing through each 12000 km or 6 months
      2.6.1. Check and replacement of brushes of screenwash
      2.6.2. Check and adjustment of a free wheeling of a pedal of coupling
      2.6.3. Check of a state and charging of the battery
      2.6.4. Drive belt
      2.6.5. Check of a condition of hoses in a motor compartment
      2.6.6. Check of the cooling system
      2.6.7. Shift of wheels
   + 2.7. Servicing through each 24000 km or 12 months
   + 2.8. Servicing through each 50000 km or 2 years
   + 2.9. Servicing through each 100000 km or 4 years
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



2.6.2. Check and adjustment of a free wheeling of a pedal of coupling

PERFORMANCE ORDER
1. Slightly press a pedal to feeling of resistance to movement and by means of a small steel ruler measure distance from the provision of completely released pedal to that place in which resistance to the further course starts being felt.
2. The free wheeling of a pedal of coupling has to be in normal limits. If the free wheeling does not meet standard, it should be adjusted.
3. Release a lock-nut (1) fork of a pusher of the main cylinder about a pedal. Adjustment of a free wheeling of a pusher of the main cylinder of coupling, height of a pedal (4) and a free wheeling of a pedal (3) is carried out by an otpuskaniye of lock-nuts and rotation of a pusher or adjusting bolt (2).
4. Rotating a pusher, adjust a free wheeling of a pedal of coupling and a free wheeling of a pusher.
5. Tighten a lock-nut.
6. After adjustment of a free wheeling of a pedal of coupling check distance to a pedal from an anticorrosive covering of a body floor.
7. If this distance differs from standard, turn off a lock-nut of an adjusting bolt and rotate a bolt before receiving the necessary distance. After adjustment tighten a nut.