Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
- 6. System of decrease in toxicity
   6.1. Specifications
   6.2. Electronic control system
   6.3. Electronic control unit
   + 6.4. System of onboard diagnostics
   - 6.5. Sensors of system of automatic control of the engine
      6.5.1. Sensor of temperature of cooling liquid
      6.5.2. Sensor of concentration of oxygen
      6.5.3. Sensor of an angle of rotation of a butterfly valve (TPS sensor)
      6.5.4. The sensor of absolute pressure on the soaking-up collector (MAR-sensor)
      6.5.5. The air temperature sensor on the soaking-up collector (IAT sensor)
      6.5.6. Temperature sensor of system of recirculation (EGR sensor)
      6.5.7. Car speed sensor (VSS sensor)
      6.5.8. Detonation sensor
      6.5.9. Sensor of an angle of rotation of the crankshaft
   6.6. System of catching of vapors of gasoline
   6.7. System of recirculation (EGR system)
   6.8. System of compulsory ventilation of a case (PCV system)
   6.9. Catalytic converter
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



6.5.6. Temperature sensor of system of recirculation (EGR sensor)

GENERAL INFORMATION

The temperature EGR sensor is mounted near the recirculation valve. The sensor traces change of temperature of exhaust gases when passing via the recirculation valve.

Information on temperature comes to the control unit which precisely regulates time of inclusion / switching off of the valve, providing increase of efficiency of purification of exhaust gases. At violation of operation of the temperature EGR sensor in memory the code 71 registers.

Check

PERFORMANCE ORDER
1. Disconnect from the conducting socket.
2. Measure sensor resistance at various temperatures. Standard values of resistance at various temperature are specified in subsection 6.1.

Replacement

PERFORMANCE ORDER
1. Disconnect the socket of conducting and Rozhkov a key turn out the sensor from an inlet collector.
2. Installation is carried out upside-down.