Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Specifications
   9.2. System of anti-blocking of brakes (ABS)
   9.3. Brake shoes of forward brakes
   9.4. Support of forward brakes
   9.5. Brake shoes of back disk brakes
   9.6. Support of back disk brakes
   9.7. Brake disk
   9.8. Brake shoes of back drum brakes
   9.9. Working cylinder
   9.10. Main cylinder of brake system
   9.11. Brake hoses and tubes
   9.12. Hydraulic system of brakes
   9.13. Vacuum amplifier
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Brake pedal
   9.17. Switch of headlights of a stoplight
   9.18. Valve of restriction of pressure sensitive to car loading
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



9.14. Emergency brake

GENERAL INFORMATION

Adjustment

The lever of the emergency brake at the correct adjustment has to rise by 4–7 clicks if to pull it with an average force. If it rises by smaller number of clicks, there is a probability that the car is not removed completely from the emergency brake and brake shoes constantly concern brake disks or drums. If the lever can be lifted on bigger number of clicks, the emergency brake can not hold the car on an inclination, and it can sweep.

PERFORMANCE ORDER
1. For receiving access to the adjusting mechanism of a rope of the emergency brake remove the central console (see subsection 11.24).
2. Turn off a lock-nut (the top nut), holding an adjusting nut (lower) by means of a wrench. Turn an adjusting nut so that to receive the demanded size of the course of the lever of the emergency brake. Tighten a lock-nut.
3. Install the central console into place.