Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
- 9. Brake system
   9.1. Specifications
   9.2. System of anti-blocking of brakes (ABS)
   9.3. Brake shoes of forward brakes
   9.4. Support of forward brakes
   9.5. Brake shoes of back disk brakes
   9.6. Support of back disk brakes
   9.7. Brake disk
   9.8. Brake shoes of back drum brakes
   9.9. Working cylinder
   9.10. Main cylinder of brake system
   9.11. Brake hoses and tubes
   9.12. Hydraulic system of brakes
   9.13. Vacuum amplifier
   9.14. Emergency brake
   9.15. Ropes of the emergency brake
   9.16. Brake pedal
   9.17. Switch of headlights of a stoplight
   9.18. Valve of restriction of pressure sensitive to car loading
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



9.17. Switch of headlights of a stoplight

The switch of headlights of a stoplight is installed on an arm from above to a brake pedal. The switch includes stoplight headlights behind the car when pressing a brake pedal.

Check

PERFORMANCE ORDER
1. For check of the switch of headlights of a stoplight check, whether stoplight headlights light up when pressing a pedal of a brake and whether they die away if to release a brake pedal. If is not present, adjust the switch (adjustment of the switch is part of operation on adjustment of a pedal of a brake) (see subsection 9.16).
2. If headlights still do not light up, so on the switch tension does not arrive, the switch is faulty, or there is a gap in a chain between the switch and headlights. There is a probability that all bulbs of headlights of a stoplight fused, however, it is improbable.
3. By means of the voltmeter or a control bulb check existence of tension on one of the parties of the switch. If tension is absent, check integrity of a chain from the switch to the block of safety locks. If tension is present, check existence tension on other plug of the switch when pressing a brake pedal. If tension is absent, replace the switch. If tension is present, check integrity of an electric chain from the switch to stoplight headlights (if it is necessary, see subsection 12.25.9).

Replacement

PERFORMANCE ORDER
1. Disconnect a wire of the negative plug of the accumulator.
2. Disconnect the socket of connection of the switch of headlights of a stoplight.
3. Turn off a lock-nut and unscrew the switch from a pedal arm.
4. Installation is carried out upside-down removals.
5. Adjust a pedal of a brake and the switch of headlights of a stoplight (see subsection 9.16).








Sonnenschutz Auto . .