Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
- 10. Suspension bracket and steering
   10.1. Specifications
   10.2. Rack of a suspension bracket (lobby)
   10.3. Suspension bracket rack
   10.4. Stabilizer of cross stability (forward suspension bracket) and plug
   10.5. Suspension bracket lever
   10.6. Spherical hinges
   10.7. Rotary fist and nave
   10.8. Nave and bearing of a nave (forward wheel)
   10.9. Stabilizer of cross stability (back suspension bracket) and plug
   10.10. Rack of a suspension bracket (back)
   10.11. Longitudinal draft
   10.12. Cross drafts of a suspension bracket
   10.13. Nave and bearing (back wheel)
   10.14. Arm of a nave of a back wheel
   10.15. Steering
   10.16. Steering wheel
   10.17. Tips of steering drafts
   10.18. Steering transfer
   10.19. Pump of system of strengthening of a steering
   10.20. System of strengthening of a steering
   10.21. Wheels and tires
   10.22. Adjustment of corners of installation of wheels
+ 11. Body
+ 12. Electric equipment



10.15. Steering

GENERAL INFORMATION

On all models the steering of rack type is established. Steering transfer fastens to a partition of a body and operates rotary fists through steering drafts. The internal ends of steering drafts are protected by rubber covers which need to be checked periodically for reliability of fastening, existence of gaps or leak of greasing.

The system of strengthening of a steering consists of the pump with the drive from a driving belt of the engine and includes tubes and hoses. Level of hydraulic liquid in a tank of the pump needs to be checked periodically (see subsection 2.5).

The steering wheel rotates a shaft of a steering column which operates steering transfer via the Universal hinge. Looseness of a steering can be caused by wear of the Universal hinge of a shaft of a steering column, wear of steering transfer, fastenings of cross steering drafts or weakening of an inhaling of fixing bolts.