Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   - 1.5. Governing bodies and instrumentations
      1.5.1. Keys for the car
      1.5.2. System of an immobilizer (recognition of a code of start-up of the engine)
      1.5.3. Locking of doors
      1.5.4. Electric equipment of doors
      1.5.5. Drive of glasses
      1.5.6. Trunk lid
      1.5.7. Back door
      1.5.8. Cowl
      1.5.9. Stopper of a jellied mouth of a fuel tank
      1.5.10. The hatch with the electric drive
      1.5.11. Adjustment of forward seats
      1.5.12. Addition of a back seat
      1.5.13. Head restraint
      1.5.14. Seat heater
      1.5.15. Safety cushions for the driver and the passenger
      1.5.16. Elements of system of additional damping at accident
      1.5.17. Adjustment of an inclination of a steering wheel
      1.5.18. Rear-view mirror
      1.5.19. Headlights and indexes of turns
      1.5.20. Adjustment of a beam of light of headlights
      1.5.21. Signal of an emergency stop and regulator of illumination of devices
      1.5.22. Back fog lamps
      1.5.23. Lamps of internal lighting
      1.5.24. Inclusion of a cleaner and washer of a windshield
      1.5.25. Inclusion of a cleaner and washer of back glass
      1.5.26. Heater of back glass
      1.5.27. Index of level of fuel
      1.5.28. Index of temperature of cooling liquid
      1.5.29. Voltmeter
      1.5.30. Tachometer
      1.5.31. The counter of the total passable way
      1.5.32. Light indexes and the warning signals
      1.5.33. Lock of ignition and lock of a steering column
      1.5.34. 3-staged automatic transmission
      1.5.35. 4-staged automatic transmission
      1.5.36. Mechanical transmission
      1.5.37. System of blocking of interaxal differential
      1.5.38. Emergency brake
      1.5.39. The AM-UKV radio receiver with electronic control
      1.5.40. The AM-VHF-radio tape recorder with electronic control
      1.5.41. Adjustment of the direction of a stream of air
      1.5.42. Hours
      1.5.43. Lighter and ashtray
      1.5.44. Glove box
      1.5.45. The container for trifles
      1.5.46. A framework for transportation of baggage (a body the Versatile person)
      1.5.47. Trunk lid
      1.5.48. Laid on rug of a floor
      1.5.49. Car running in period
      1.5.50. Fuel
      1.5.51. Threefold catalytic converter
      1.5.52. Oil expenditure engine
      1.5.53. Brakes
      1.5.54. Rules of placement of freight in a luggage carrier
      1.5.55. Identification data of the car
   + 1.6. Start-up of the engine and driving
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment


1.5.40. The AM-VHF-radio tape recorder with electronic control

GENERAL INFORMATION

Receiver

1. Button of turning on of the receiver and choice of AM-or VHF reception
2. The party of the button for control with reduction in the frequency
3. The button for control for station
4. The party of the button for control with increase of frequency
5. Buttons of a choice of station
6. Button of adjustment of a timbre or balance
7. Button of a choice of adjustment of a timbre or balance
8. Display
9. NF button of automatic search of RDS system in all range of a network broadcasting
10. Buttons for setup of the receiver and a choice of the IT mode (reception of road information)
11. Handle of adjustment of a sound

Cassette player

1. Button of inclusion of a player
2. The party of the button for rewind back
3. The button for rewind of the cartridge in both directions
4. Storna of the button for rewind forward
5. Dalby noise suppressor button
6. Button of adjustment of a timbre or balance

7. Button of a choice of adjustment of a timbre or balance
8. Display
9. The button of a choice of the party of the cartridge for reproduction
10. The button for a stop and removal of the cartridge
11. Handle of adjustment of a sound

Use of the receiver

PERFORMANCE ORDER
1. Turn on the receiver, having pressed the L.M.U button, choose the stereo mode - or monophonic reception or press the TI button for reception of station of a broadcasting of road information. On the display there will be symbols of L, M or U. The receiver can also be turned on pressing the PWR.VOL handle.
2. Adjust loudness, turning the PWR.VOL handle.
3. Be adjusted on the necessary station. At control for VHF station the receiver will automatically switch in the stereoreception mode. On the display there will be a ST symbol. If the signal weak, occurs automatic narrowing of a strip of reception for the purpose of decrease in noise. If the signal very weak, occurs automatic switching of the receiver on the monophonic mode of reception.
4. Adjust a timbre and balance.
5. To switch off the receiver, press the PWR.VOL handle.

Control for station

Be adjusted on the necessary station by means of one of the ways offered below. On the display there will be a value of frequency of control.

PERFORMANCE ORDER
Control in the program mode
1. Apply the program mode to control for in advance programmed station.
2. Press several times the LMU button until on the display there is a chosen information.
3. Press the button with number which was in advance appropriated to the necessary station. There is a control for the necessary station, and on the display there will be number of the button of the necessary station.
Mode of continuous search
4. Press at the same time on both parties the TUNE SEEK buttons and wait for a continuous sound signal. The receiver will start carrying out automatically search of the nearest station with higher or lower frequency of a broadcasting. After a consistent reception control stops. By each subsequent pressing of the button search will proceed to a consistent reception of the following station.
5. If because of too weak signal it is not possible to be adjusted after single scanning in all range of frequencies, search will proceed, but at hypersensibility, and on the display there will be a symbol of DX. After reception of station control automatically stops.
Manual control
6. Press at the same time on both parties the TUNE SEEK buttons for a while, not exceeding 0,5 pages. By each pressing of the button occurs pereskok to the frequency at which the broadcasting is possible.

 Control programming

PERFORMANCE ORDER
1. Press several times the LMU button until on the display there is a designation of the chosen range of L, M or U. You can establish to six stations in each chosen range (on each pressed button). At installation of station check those ranges in which the necessary control already is.
2. Be adjusted on the necessary station.
3. Press one of buttons of a choice of station and wait for a sound signal. Thus the station will automatically join when pressing this button, which number will appear on the display. To bring control for new station in memory, repeat the procedure described above. Control for the programmed station is erased at power off (a battery detachment, burn-out of a safety lock, etc.).

Obtaining road information from RDS system (radio data)

PERFORMANCE ORDER
1. The receiver will automatically switch in the mode of reception of the station broadcasting RDS information when switching on VHF range. When switching on the display there will be a name of the relevant radio station and a RDS symbol.
2. If to be adjusted on the new VHF station broadcasting RDS information, on the display there will be a value of frequency, and through 5 with there will be a name of the relevant radio station.
Control by programming, automatic search and manually
3. The order of control is described above.
Control by scanning in all range
4. When on the display there is a symbol of TR (Traffic Program), it means that this station will broadcast road information and data of EON.
5. The receiver is switched to TI range by pressing of the TI button. Thus on the display there will be a TI symbol. If later 20 with the ambassador of pressing of the TI button the receiver does not find station, search of station on the basis of the list of alternative frequencies (AF list) which comes to an end at detection of station will begin. Warns a sound signal and a SEARCH symbol on the display about transition of the receiver to such mode.
If it is not possible to be adjusted on station after single scanning in all range because of a weak signal, scanning will repeat, but at hypersensibility to what the symbol of DX on the display will testify. If the signal too weak, the receiver stops search and on the display on 2 with there will be NOTHING. If during 20 more about the receiver it is not adjusted on station of TI range, scanning will be started anew. When on the display there is TI, the receiver will accept TI station only if control is made by search in the automatic mode.
6. If obtaining road information is required, and the station on which the receiver is adjusted, broadcasts other program, press the TI button and hold until on the display there is no symbol THAT (Traffic Announcement). At emergence of this symbol the receiver ceases to accept all programs, except road or if transfer of road information at the moment being absent, and the cartridge is inserted into a player, the player which is automatically switched off at the time of the beginning of a broadcasting of road information joins. After the end of transfer or if the signal becomes weak, the previous program joins.
7. To come back from the mode of reception of road information to the usual mode, press the TI button and hold until from the display the symbol THAT does not disappear.
Control for the tracking mode on networks (IMF mode)
8. Control for the tracking mode on networks (IMF mode) is used for search of RDS station in all strip of frequencies. Press the NF button and hold more than 2 with, thus the receiver will be adjusted on RDS station, and the accepted program will not interrupt. On the display there will be a NF symbol. At deterioration of conditions of reception control for station which broadcasts the same program, will be made on the basis of the list of the alternative frequencies received from RDS station.
9. If the RDS station (with data of EON (Enhanced Other Network)) to which you listen, does not transfer road information in the TI and TA modes, the receiver will automatically switch to the program broadcasting road information on the basis of the list of alternative frequencies of EON. After the end of transfer the previous program automatically joins. At the beginning and after nepeklyucheniya sound signals are distributed.
10. For cancellation of the NF mode press the NF button and keep not less than 2 villages. When on the display there is a REGON symbol, the receiver will be adjusted on such RDS station which has an identical code of identification of the program (PI-code). When on the display there is a REG OFF symbol, the receiver will be adjusted on such RDS station which has an identical three-digit PI-code.
11. If during 60 about the receiver does not find RDS station, there is a muffling of all programs and search of station with an identical PI-code on the basis of the list of alternative frequencies (AF list) begins. If because of a weak signal to find station it is not possible, search of all stations of VHF range will be started over again. Warns a sound signal and a SEARCH symbol on the display about transition of the receiver to such mode. If it is not possible to be adjusted because of very weak signal, search stops and on the display on 2 with there will be a NOTHING symbol.
12. For cancellation of the NF mode press the NF button twice. The NF symbol will disappear from the display.

 Adjustment of a timbre

PERFORMANCE ORDER
1. For adjustment of reproduction in the field of the lower frequencies press several times the MODE button until on the display there is no BASS O. Then press the level button from any party and establish the necessary timbre. Adjustment range from BASS –10 to BASS +10, the level of a timbre is displayed on the display.
2. For adjustment of reproduction in the field of the top frequencies press several times the MODE button until on the display there is no TREB O. Then press the level button from any party and establish the necessary timbre. Adjustment range from TREB –10 to TREB +10, the level of a timbre is displayed on the display.

Adjustment of balance

PERFORMANCE ORDER
Two loudspeakers
1. Press several times the MODE button until on the display there is BAL O. Then press the level button from any party and establish the necessary balance. Range of adjustment of balance for the left and right loudspeakers from BAL L14 to BAL R14, the level of balance is displayed on the display.
Four loudspeakers
2. For control of balance between the left and right loudspeaker press several times the MODE button until on the display there is BAL O. Then press the level button from any party and establish the necessary balance. Range of adjustment of balance from BAL L14 to BAL + R14, the level of balance is displayed on the display. For control of balance between forward and back loudspeakers press several times the MODE button until on the display there is FADE O. Then press the level button from any party and establish the necessary balance. Range of adjustment of balance of forward and back loudspeakers – from FADE F14 to FADE R14, the level of balance is displayed on the display.