Toyota Corolla

1992-1998 of release

Repair and operation of the car



Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   - 1.5. Governing bodies and instrumentations
      1.5.1. Keys for the car
      1.5.2. System of an immobilizer (recognition of a code of start-up of the engine)
      1.5.3. Locking of doors
      1.5.4. Electric equipment of doors
      1.5.5. Drive of glasses
      1.5.6. Trunk lid
      1.5.7. Back door
      1.5.8. Cowl
      1.5.9. Stopper of a jellied mouth of a fuel tank
      1.5.10. The hatch with the electric drive
      1.5.11. Adjustment of forward seats
      1.5.12. Addition of a back seat
      1.5.13. Head restraint
      1.5.14. Seat heater
      1.5.15. Safety cushions for the driver and the passenger
      1.5.16. Elements of system of additional damping at accident
      1.5.17. Adjustment of an inclination of a steering wheel
      1.5.18. Rear-view mirror
      1.5.19. Headlights and indexes of turns
      1.5.20. Adjustment of a beam of light of headlights
      1.5.21. Signal of an emergency stop and regulator of illumination of devices
      1.5.22. Back fog lamps
      1.5.23. Lamps of internal lighting
      1.5.24. Inclusion of a cleaner and washer of a windshield
      1.5.25. Inclusion of a cleaner and washer of back glass
      1.5.26. Heater of back glass
      1.5.27. Index of level of fuel
      1.5.28. Index of temperature of cooling liquid
      1.5.29. Voltmeter
      1.5.30. Tachometer
      1.5.31. The counter of the total passable way
      1.5.32. Light indexes and the warning signals
      1.5.33. Lock of ignition and lock of a steering column
      1.5.34. 3-staged automatic transmission
      1.5.35. 4-staged automatic transmission
      1.5.36. Mechanical transmission
      1.5.37. System of blocking of interaxal differential
      1.5.38. Emergency brake
      1.5.39. The AM-UKV radio receiver with electronic control
      1.5.40. The AM-VHF-radio tape recorder with electronic control
      1.5.41. Adjustment of the direction of a stream of air
      1.5.42. Hours
      1.5.43. Lighter and ashtray
      1.5.44. Glove box
      1.5.45. The container for trifles
      1.5.46. A framework for transportation of baggage (a body the Versatile person)
      1.5.47. Trunk lid
      1.5.48. Laid on rug of a floor
      1.5.49. Car running in period
      1.5.50. Fuel
      1.5.51. Threefold catalytic converter
      1.5.52. Oil expenditure engine
      1.5.53. Brakes
      1.5.54. Rules of placement of freight in a luggage carrier
      1.5.55. Identification data of the car
   + 1.6. Start-up of the engine and driving
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment



1.5.9. Stopper of a jellied mouth of a fuel tank

GENERAL INFORMATION

Stopper of a jellied mouth of a fuel tank (with the door locked by a latch)

To open a door of a stopper of a jellied mouth of a fuel tank, pull for the lever up.

Prevention

During filling the car it is forbidden to smoke, use naked flame. To fill the car only at the stopped engine.

Do not open quickly a tank stopper. In hot weather at fast opening of a stopper the fuel which is under pressure can be splashed out sharply outside and to become the reason of injuries.


To open a tank stopper, slowly turn a stopper counterclockwise then, having waited a little, remove a stopper. Insert a stopper in the holder of a door.

Opening of a mouth is always followed by a characteristic sound. At a wraparound of a stopper turn it clockwise before click.

Prevention

Be convinced of that the stopper is densely closed. At leaky closing of a stopper possibly gasoline pouring out in case of accident.

When replacing a stopper of a fuel tank get only a stopper of Toyota firm. The ventilating valve reporting internal space of a tank with the atmosphere at fuel consumption is built in a stopper.


Stopper of a jellied mouth of a fuel tank (with the door locked by the lock)

To open a door of a stopper of a jellied mouth of a fuel tank, insert a key and turn counterclockwise.
To open a tank stopper, slowly turn a stopper counterclockwise, then, having waited a little, remove a stopper. Insert a stopper in the holder.

Opening of a mouth is always followed by a characteristic sound. At a wraparound of a stopper turn it clockwise before click.

Security measures see above.









: