Toyota Corolla

1992-1998 of release

Repair and operation of the car

Toyota Corolla
- 1. Maintenance instruction
   1.2. Codes of models
   1.3. Control panel
   + 1.4. Combination of devices
   + 1.5. Governing bodies and instrumentations
   - 1.6. Start-up of the engine and driving
      1.6.1. Check before start-up of the engine
      1.6.2. Check after start-up of the engine
      1.6.3. Methods of driving
      - 1.6.4. Towage of the trailer Installation of the hook-on device
      1.6.5. Actions at refusal of start-up of the engine
      1.6.6. Obligatory set of tools and spare wheel
      1.6.7. Replacement of a wheel
      1.6.8. Towage of the car
      1.6.9. Motor compartment
      1.6.10. Arrangement of safety locks
      1.6.11. Check of level of oil in the engine
      1.6.12. Oil brand choice
      1.6.13. Check of level of cooling liquid
      1.6.14. Composition of cooling liquid
      1.6.15. Check of pressure in tires
      1.6.16. Replacement of tires
      1.6.17. Shift of wheels
      1.6.18. Installation of winter tires and chains
      1.6.19. Precautionary measures for cast aluminum disks
      1.6.20. Check of an external condition of the battery
      1.6.21. Check of level of electrolyte
      1.6.22. Battery charging
      1.6.23. Check and replacement of safety locks
      + 1.6.24. Replacement of lamps
   1.7. Specifications
   1.8. Adjusting data, filling capacities and liquids
   + 1.9. Possible malfunctions
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling systems, heating
+ 5. Fuel, exhaust systems
+ 6. System of decrease in toxicity
+ 7. Transmissions
+ 8. Coupling and half shafts
+ 9. Brake system
+ 10. Suspension bracket and steering
+ 11. Body
+ 12. Electric equipment

1.6.4. Towage of the trailer


Your car is intended for transportation of passengers. Towing of the trailer worsens driving, dynamics of maneuver, raises a brake way, reduces profitability. It is forbidden to overload the car and the trailer. Manufacturer's guarantees do not extend on damages and malfunctions which are caused by towing of the trailer for the purpose of transportation of big consignments.


Before towage of the trailer be convinced that the full mass of the car with the trailer, a maximum load on an axis and load of the coupling device do not exceed norm (see subsection 1.7)

Follow the following rules:

 – the full mass of the trailer with freight does not exceed maximum permissible;
 – freight in the trailer has to be distributed so that load of the coupling device was not lower than 25 kgfs, but also did not exceed norm;
 – load of a back axis at connection of the car with the trailer should not exceed maximum permissible load of this axis more than for 15%;
 – maximum permissible load of a back axis is specified in the plate of the manufacturer with data of the car.

The plate with data of the car

1. Full mass of the car

2. Maximum permissible load of a back axis